86-755-83281596
16A, Tairan Shuisong Bldg., Shenye, Binhe Rd., Shatou St., Futian Dist., Shenzhen, Guangdong, China (Mainland)
AHLD812-Z-ZLL is a kind of ZLL/ HA1.2 protocol device for SC/ CCT LED light. It’s compatible with Osram Lightify/ Echo Plus gateway/ IKEA Tradfri and other ZLL/ ZigBee HA1.2.
Caution: Please cut off all power before installation!
Terminal | Describe | |
AC Input | L (Brown 22# , length 150 mm) | AC 200V-240V |
N (Blue 22# , length 150 mm) | ||
LED DC Output | V+ (Red 22# , length 150 mm) | LED Driver, (Common Anode) |
C- (White 22#, length 150 mm) | ||
W- (Yellow22#,length 150 mm) | ||
Two types of output voltage and current setting for this driver, see parameter in table 1 and 2
Table1. Defaulted current setting for output voltage 18-36V
Type | Output voltage (±5%) | Current voltage MAX | Note |
W | 350mA | 36VDC | Output For CCT Version |
C | 350mA | 36VDC | Output For SC Version and CCT Version |
Table2. Defaulted current setting for output voltage 9-20V
Type | Output voltage (±5%) | Current voltage MAX | Note |
W | 550mA | 20VDC | Output For CCT Version |
C | 550mA | 20VDC | Output For SC Version and CCT Version |
Caution! Max power for this Zigbee driver AHLD812-Zll is 13W, defaulted current can be set according to the lamp, but total current for the 2 channels should be no more than 13W.
Connect Philips Hue, Osram or ZLL/ HA1.2 with router and download their App from Google Play or App Store.
Power on the ZLL device.
Find the ZLL device on the App and named it, control the LED lamp by the App.
This ZLL devices can be controlled by a wall mounted dimming switch. See steps below.
Restore Factory Setting
Step 1: AC power on and off the device within 2 seconds.
Step 2: Repeat step1 for 4 times.
Step 3: Power on the device following up with step 2, lamp will flash for 4 times, then keep on. Reset done.
P.S. The lamp will be reduced to 30% luminance when it is successfully added into the App.
Specification | AHLD812-Zll-CT | AHLD812-Zll-SC |
Input Power | 200-240VAC | 200-240VAC |
Channels | 2 Channels | 1 Channel |
Output Current | 350mA MAX(18-36V version) 550mA MAX(9-20V version) | 350mA MAX(18-36V version) 550mA MAX(9-20V version) |
Output DC | 18-36V(43VDC MAX at No Load) 9-20V(26VDC MAX at No Load) | 18-36V(43VDC MAX at No Load) 9-20V(26VDC MAX at No Load) |
PF | > 0.75 (MAX Load) | > 0.75 (MAX Load) |
Efficiency | Max 85% | Max 85% |
Wireless frequency | 2.4GHz | 2.4GHz |
Operation Temperature | -20°C to 55°C | -20°C to 55°C |
No land power | <0.5W | <0.5W |
Size: 65x25mm
Gross Weight: 65g
Package: 1pc/ package
